Alumina Ceramic Pulley Lagging Tile
Njirimara ngwaahịa
> Isi ike dị elu na ọkwa 9 nke Moh siri ike.
> Nnukwu abrasion na nguzogide kemịkalụ.
> Mkpofu ndị pụrụ iche emebere maka nguzogide iyi.
> Ịdị arọ nwere nha dị iche iche.
Ngwa
A na-eji ya dị ka seramiki lagging pulley.
> Vulcanized na roba seramiiki mpempe akwụkwọ.
> Na-arapara na akwụkwọ, silk, naịlọn.
Nha
| Ngwaahịa | Ogologo(mm) | Obosara (mm) | Ọkpụrụkpụ gụnyere dimple(mm) |
| Ceramic Tile nwere dimples 5 | 20±0.3 | 20±0.3 | 5/6/7/8/9/10 |
| Ceramic Tile nwere dimple 13 | 20±0.3 | 20±0.3 | 5/6/7/8/9/10 |
| Ceramic Tile nwere dimple 18 | 20±0.3 | 30±0.5 | 5/6/7/8/9/10 |
| Ceramic Tile nwere dimple 13 | 25±0.4 | 25±0.4 | 5/6/7/8/9/10 |
Ngwakọta kemịkalụ
| Al2O3 | SiO2 | CaO | MgO | Na2O |
| 92-93% | 3 ~ 6% | 1 ~ 1.6% | 0.2-0.8% | 0.1% |
Njirimara anụ ahụ
| Nnukwu ike ndọda (g/cc) | > 3.60 |
| Obere porosity pụtara (%) | 0 |
| Ike Flexural (20ºC, Mpa) | 280 |
| Ike mkpakọ (20ºC, Mpa) | 850 |
| Rockwell hardness (HRA) | 80 |
| Vickers hardness (hv) | 1050 |
| Ike Moh (ọnụọgụ) | ≥9 |
| Mgbasa ọkụ (20-800ºC, x10-6/ºC) | 8 |
| Nha kristal (μm) | 1.3-3.0 |
Ọrụ
Anyị na-anabata iwu omenala.
Ọ bụrụ na ịchọrọ ịmatakwu ozi ngwaahịa, biko nweere onwe gị ịkpọtụrụ anyị ma anyị ga-enye gị ngwaahịa kachasị mma na ọrụ kacha mma!
Mkpado ngwaahịa
Dee ozi gị ebe a ziga anyị ya
